


Kingston 16GB 3200MHZ DDR4 Non-ECC CL22 Memory (KVR32S22S8/16)
ValueRAM's KVR32S22D8/16 is a 2G xĀ 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM),Ā 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bitĀ FBGA components. The SPD is programmed to JEDEC standardĀ latency DDR4-3200 timing of 22 22-22 at 1.2V. This 260-pin DIMMĀ uses gold contact fingers. The electrical and mechanicalĀ specifications are as follows:
Features:Ā
ā¢Ā Power Supply: VDD = 1.2V Typical
⢠VDDQ = 1.2V Typical
⢠VPP = 2.5V Typical
⢠VDDSPD = 2.2V to 3.6V
⢠Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
⢠Low-power auto self refresh (LPASR)
⢠Data bus inversion (DBI) for data bus
⢠On-die VREFDQ generation and calibration
⢠Dual-rank
⢠On-board I2 serial presence-detect (SPD) EEPROM
⢠16 internal banks; 4 groups of 4 banks each
⢠Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
⢠Selectable BC4 or BL8 on-the-fly (OTF)
⢠Fly-by topology
⢠Terminated control command and address bus
⢠PCB: Height 1.18ā (30.00mm)
⢠RoHS Compliant and Halogen-Free
Original: $92.62
-70%$92.62
$27.79Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ValueRAM's KVR32S22D8/16 is a 2G xĀ 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM),Ā 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bitĀ FBGA components. The SPD is programmed to JEDEC standardĀ latency DDR4-3200 timing of 22 22-22 at 1.2V. This 260-pin DIMMĀ uses gold contact fingers. The electrical and mechanicalĀ specifications are as follows:
Features:Ā
ā¢Ā Power Supply: VDD = 1.2V Typical
⢠VDDQ = 1.2V Typical
⢠VPP = 2.5V Typical
⢠VDDSPD = 2.2V to 3.6V
⢠Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
⢠Low-power auto self refresh (LPASR)
⢠Data bus inversion (DBI) for data bus
⢠On-die VREFDQ generation and calibration
⢠Dual-rank
⢠On-board I2 serial presence-detect (SPD) EEPROM
⢠16 internal banks; 4 groups of 4 banks each
⢠Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
⢠Selectable BC4 or BL8 on-the-fly (OTF)
⢠Fly-by topology
⢠Terminated control command and address bus
⢠PCB: Height 1.18ā (30.00mm)
⢠RoHS Compliant and Halogen-Free
























